From the NORMAL POINT at S/C  W.108 N1.22

1. S/C 10' E

IDL> point_hex2,[-0.0997429, 0.0297995+10./60],/name
TARGET ANGLE-X        -0.0997429 (DEG)
TARGET ANGLE-Y          0.196466 (DEG)
BLOCK COMMAND ===>  81 00 F8 F5 0D AA 00 00
     -1.22591      9.89131
COMMAND NAME:  S/C  E9.89 N1.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C E9.89 N1.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F8  ACS: BC
  4  04-BC-F5  ACS: BC
  5  04-BC-0D  ACS: BC
  6  04-BC-AA  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

2. S/C 10' W

IDL> point_hex2,[-0.0997429, 0.0297995-10./60],/name
TARGET ANGLE-X        -0.0997429 (DEG)
TARGET ANGLE-Y         -0.136867 (DEG)
BLOCK COMMAND ===>  81 00 F8 F5 F6 3A 00 00
     -1.22591     -10.1087
COMMAND NAME:  S/C  W10.1 N1.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W10.1 N1.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F8  ACS: BC
  4  04-BC-F5  ACS: BC
  5  04-BC-F6  ACS: BC
  6  04-BC-3A  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

3. S/C N 1', E 3' 

IDL> point_hex2,[-0.0997429-1/60., 0.0297995+3./60],/name
TARGET ANGLE-X         -0.116410 (DEG)
TARGET ANGLE-Y         0.0797995 (DEG)
BLOCK COMMAND ===>  81 00 F7 C9 05 76 00 00
     -2.22591      2.89131
COMMAND NAME:  S/C  E2.89 N2.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C E2.89 N2.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F7  ACS: BC
  4  04-BC-C9  ACS: BC
  5  04-BC-05  ACS: BC
  6  04-BC-76  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

4. S/C  N 1', E 2'

IDL> point_hex2,[-0.0997429-1/60., 0.0297995+2./60],/name
TARGET ANGLE-X         -0.116410 (DEG)
TARGET ANGLE-Y         0.0631328 (DEG)
BLOCK COMMAND ===>  81 00 F7 C9 04 4A 00 00
     -2.22591      1.89131
COMMAND NAME:  S/C  E1.89 N2.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C E1.89 N2.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F7  ACS: BC
  4  04-BC-C9  ACS: BC
  5  04-BC-04  ACS: BC
  6  04-BC-4A  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++


5. S/C  N 1', E 1'

IDL> point_hex2,[-0.0997429-1/60., 0.0297995+1./60],/name
TARGET ANGLE-X         -0.116410 (DEG)
TARGET ANGLE-Y         0.0464662 (DEG)
BLOCK COMMAND ===>  81 00 F7 C9 03 1E 00 00
     -2.22591     0.891310
COMMAND NAME:  S/C  E.891 N2.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C E.891 N2.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F7  ACS: BC
  4  04-BC-C9  ACS: BC
  5  04-BC-03  ACS: BC
  6  04-BC-1E  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++


6. S/C  N 1', E 0'

IDL> point_hex2,[-0.0997429-1/60., 0.0297995],/name      
TARGET ANGLE-X         -0.116410 (DEG)
TARGET ANGLE-Y         0.0297995 (DEG)
BLOCK COMMAND ===>  81 00 F7 C9 01 F2 00 00
     -2.22591    -0.108690
COMMAND NAME:  S/C  W.108 N2.22            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.108 N2.22
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F7  ACS: BC
  4  04-BC-C9  ACS: BC
  5  04-BC-01  ACS: BC
  6  04-BC-F2  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC