NORMAL POINTING UPDATE REQUEST 22-Nov-98

1) please schedule OP+OG upload 
2) subsequent to the upload, please execute ROG #032 (dec)

********************************

The following shows the calculation for the new pointing coordinates.

1. Existing OG #032 is NML N1.20 W.053

2. Desired offpoint (TERM_REVIEW,/set) is 

Increment Euler angles (X, Y) by: 
     -17.3805      1.18779 arc sec

3. Re-create old OG:

IDL> point_hex2,[-0.0993798,0.0307113],/name
% Compiled module: TO_HEX.
TARGET ANGLE-X        -0.0993798 (DEG)
TARGET ANGLE-Y         0.0307113 (DEG)
BLOCK COMMAND ===>  81 00 F8 FC 02 02 00 00
     -1.20412   -0.0539819
COMMAND NAME:  S/C  W.053 N1.20            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.053 N1.20
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F8  ACS: BC
  4  04-BC-FC  ACS: BC
  5  04-BC-02  ACS: BC
  6  04-BC-02  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

4. New OG

IDL> point_hex2,[-0.0993798-17.3805/3600,0.0307113+1.18779/3600],/name
TARGET ANGLE-X         -0.104208 (DEG)
TARGET ANGLE-Y         0.0310412 (DEG)
BLOCK COMMAND ===>  81 00 F8 A5 02 08 00 00
     -1.49380   -0.0341854
COMMAND NAME:  S/C  W.034 N1.49            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.034 N1.49
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F8  ACS: BC
  4  04-BC-A5  ACS: BC
  5  04-BC-02  ACS: BC
  6  04-BC-08  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++