NORMAL POINTING UPDATE REQUEST 4-Oct-98

1) please schedule OP+OG upload 
2) subsequent to the upload, please execute ROG #032 (dec)

********************************

The following shows the calculation for the new pointing coordinates.

1. Existing OG #032 is NML N.653 W.182

2. Desired offpoint (TERM_REVIEW,/set) is 

Increment Euler angles (X, Y) by: 
     -21.7256      3.98803 arc sec

3. Re-create old OG:

IDL> point_hex2,/name,[-0.0902048 ,  0.0285696]
% Compiled module: POINT_HEX2.
% Compiled module: TO_HEX.
TARGET ANGLE-X        -0.0902048 (DEG)
TARGET ANGLE-Y         0.0285696 (DEG)
BLOCK COMMAND ===>  81 00 F9 A1 01 DC 00 00
    -0.653622    -0.182484
COMMAND NAME:  S/C  W.182 N.653            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.182 N.653
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F9  ACS: BC
  4  04-BC-A1  ACS: BC
  5  04-BC-01  ACS: BC
  6  04-BC-DC  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

4. New OG
 
IDL> point_hex2,/name,[-0.0902048-21.7256/3600 ,  0.0285696+3.98/3600]
TARGET ANGLE-X        -0.0962397 (DEG)
TARGET ANGLE-Y         0.0296752 (DEG)
BLOCK COMMAND ===>  81 00 F9 34 01 F0 00 00
     -1.01572    -0.116151
COMMAND NAME:  S/C  W.116 N1.01            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.116 N1.01
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-F9  ACS: BC
  4  04-BC-34  ACS: BC
  5  04-BC-01  ACS: BC
  6  04-BC-F0  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++