NORMAL POINTING UPDATE REQUEST

1) please schedule OP+OG upload
2) subsequent to the upload, please execute ROG #032 (dec)

********************************

The following shows the calculation for the new pointing coordinates.

1. Existing OG #032 is NML N.146 W.086 

2. Desired offpoint (TERM_REVIEW,/set) is 

Increment Euler angles (X, Y) by: 
      19.5531     -10.5214 arc sec

3. Re-create old OG:

IDL> point_hex2,[-0.0817473+0/3600, 0.0301741+0/3600.], /name            
TARGET ANGLE-X        -0.0817473 (DEG)
TARGET ANGLE-Y         0.0301741 (DEG)
BLOCK COMMAND ===>  81 00 FA 39 01 F9 00 00
    -0.146172   -0.0862140
COMMAND NAME:  S/C  W.086 N.146            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.086 N.146
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-FA  ACS: BC
  4  04-BC-39  ACS: BC
  5  04-BC-01  ACS: BC
  6  04-BC-F9  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++

4. New OG

IDL> point_hex2,[-0.0817473+19.553/3600, 0.0301741-10.5214/3600.], /name  
TARGET ANGLE-X        -0.0763159 (DEG)
TARGET ANGLE-Y         0.0272515 (DEG)
BLOCK COMMAND ===>  81 00 FA 9B 01 C4 00 00
     0.179712    -0.261571
COMMAND NAME:  S/C  W.261 S.179            (offset angles in arcmin)
 
----- OG EDITOR OUTPUT ---------------
 
 NUMBER :      NAME : S/C W.261 S.179
 
  1  04-DC-8A  ACS: ACP DATA SET+B7
  2  04-BC-81  ACS: BC
  3  04-BC-FA  ACS: BC
  4  04-BC-9B  ACS: BC
  5  04-BC-01  ACS: BC
  6  04-BC-C4  ACS: BC
  7  04-BC-00  ACS: BC
  8  04-BC-00  ACS: BC
  9  04-DC-11  ACS: BC EXEC     +++