Sequence name:	20080126_saved
Version:	0000
Start date:	2008/01/26 04:00:00
End date:	2008/01/30 12:02:00
Author last name:	FARID
Author first name:	Samaiyah
Pointing file:	re-point_200801266000.txt
Events file:	op_period_200801266000.evt
Events file:	plan_term_200801266000.evt
Data rate input file:	dr_200801266000.txt
Data rate output file:	dr_XRT_200801266000.txt
Data rate simulator file:	dr_XRT_200801266000.sim
Yesterday plan date:	2008/01/25
Sequence type:	OP Command plan
S/C slot:	-01
Last used:	2008/01/26 03:52:00
Last modified:	2008/01/25 04:15:51
AEC Table:	35881AE17241/0008
ARS Table:	40531CA8AA87/0007
FLD Table:	189D0A604B30/000D
FLT Table:	000040167B23/0002
ROI Table:	000000000000/0000
Deleted:	No
Locked:	No
Unique tag:	000000000000
COT version:	0.9x34
COT build:	1392
RAMSUB ID:	291
Cmd plan pass:	6000
Table load pass:	200
Export count:	4
Starting software mode:	2
	I&T	INSTRUME: XRT		
	I&T	OBSERVER: Farid,Samaiyah		
	I&T	ORIGIN: JAXA/ISAS		
	I&T	PLANNER: Sterling,Alphonse		
	I&T	TOHBANS: ARIKAWA		
>	PT	: Latest re-pointing: Track 0, Format example, meaningless pointing information (OP)	2008/01/26 00:00:00	
	ESQ	End of sequence		
>	EXT	XRT_PLN_START:  (OP)	2008/01/26 04:00:00	
	ESQ	End of sequence		
>	SEQ	TI_just_after_OP_Upload:  (OP)	2008/01/26 006:44:40	
	MSG	 (No pause)		
	MSG	************ XRT START ************ (No pause)		
	MSG	Execute, after the success of OP upload. (No pause)		
	XRT	Custom TIME_CMD : MDP_XRT_MODE_STBY AT XRT_MODE_STBY_POINT P		
	MSG	                     [   ]  [HK1_TI_CMD_NUM]     EQ    1COUNTUP (Pauses)		
	MSG	 (No pause)		
	MSG	************ XRT END *********** (No pause)		
	ESQ	End of sequence		
>	PT	: AOCS Mem-Upload-01: AOCS Mem-Upload-01 (Memory upload :   #) (OP)	2008/01/26 07:52:40	
	ESQ	End of sequence		
>	SEQ	Table_Upload_with_TI:  (OP)	2008/01/26 09:29:45	
	MSG	 (No pause)		
	MSG	************ XRT START ************ (No pause)		
	MSG	 (No pause)		
	XRT	MDP_XRT_CTRL_MANU P		
	XRT	MDP_XRT_MODE_STBY N		
	MSG	----------- Success Verify ?              OK / NG____ (Pauses)		
	MSG	 (No pause)		
	MSG	XRT Obs. Table Upload (No pause)		
	XRT	MDP_UPLOAD_XRTTBL P		
	MSG	 (No pause)		
	XRT	MDP_DUMP_XRTTBL P		
	MSG	----------- Comparison Check ?                        OK / ERR ____          (Pauses)		
	MSG	 (No pause)		
	MSG	 (No pause)		
	ROI			
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_FLD_ENA N		
	XRT	MDP_XRT_FLRCTRL_ENA N		
	MSG	---------- Success Verify ?            OK / NG ____ (Pauses)		
	MSG	 (No pause)		
	MSG	 (No pause)		
	MSG	All OK?   Yes--> Please Proceed. / No --> Stop here. (Pauses)		
	MSG	 (No pause)		
	XRT	MDP_XRT_MODE_OBSV P		
	XRT	MDP_XRT_CTRL_AUTO N		
	XRT	Custom TIME_CMD : MDP_XRT_MODE_OBSV AT XRT_MODE_OBSV_POINT P		
	XRT	Custom TIME_CMD : MDP_XRT_CTRL_AUTO AT XRT_CTRL_AUTO_POINT P		
	MSG	---------- Success Verify ?            OK / NG ____ (Pauses)		
	MSG	 (No pause)		
	MSG	************ XRT END *********** (No pause)		
	ESQ	End of sequence		
>	EXT	XRT_OP_START:  (OP)	2008/01/26 09:51:00	
	ESQ	End of sequence		
>	SEQ	HOP63:  (OP)	2008/01/26 10:00:54	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, -945.0) (OP)	2008/01/26 10:01:00	
	ESQ	End of sequence		
>	SEQ	STOP_and_2x2_Full_Sun_Synoptic_A_:  (OP)	2008/01/26 10:34:54	
	COM	=======================		
	COM	Special 2x2 binned Synoptic with a reduced data rate		
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center poiting.		
	COM	This SEQ stops previous obs, moves to compromise focus, takes 2x2 binned synoptic images and one dark.		
	COM	The difference with default-B is to take Thin-Be instead of C/Poly.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun with AR - 2x2 - Al/mesh(128/2048) + Ti/poly(256/4096) + dark cal(4096) + Al/poly(128/4096) + Thin-Be(1024/23142)		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	D25E555D356D/14A4 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/26 10:35:00	
	ESQ	End of sequence		
>	SEQ	HOP63_2:  (OP)	2008/01/26 10:44:54	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, -945.0) (OP)	2008/01/26 10:45:00	
	ESQ	End of sequence		
v	SEQ	STOP_and_Full_Sun_Pre_Bakeout_A:  (OP)	2008/01/26 17:58:24	
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center pointing.		
	COM	This SEQ stops previous obs, moves to compromise focus. The difference in this SEQ and STOP_and_Full_Sun_Pr_Bakeout_B is that it takes Ti/poly and C/poly while B takes Al/poly and Al/mesh		
	COM	Takes two full disk uncompressed pre-bakeout images.Ti/Poly and C/Poly.  		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	A1E709BCAE2B/14B2 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/26 17:58:30	
	ESQ	End of sequence		
>	SEQ	HOP63_3:  (OP)	2008/01/26 18:08:24	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, -945.0) (OP)	2008/01/26 18:08:30	
	ESQ	End of sequence		
>	SEQ	STOP_and_2x2_Full_Sun_Synoptic_B_:  (OP)	2008/01/27 00:01:24	
	COM	=======================		
	COM	Special 2x2 binned Synoptic with a reduced data rate		
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center poiting.		
	COM	This SEQ stops previous obs, moves to compromise focus, takes 2x2 binned synoptic images and one dark.		
	COM	The difference with default-A is to take C/Poly instead of Thin-Be.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun with AR - 2x2 - Al/mesh(128/2048) + Ti/poly(256/4096) + dark cal(4096) + Al/poly(128/4096) + C/Poly(256/4096)		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	E26771BCD03D/14A5 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/27 00:01:30	
	ESQ	End of sequence		
>	SEQ	HOP63_4:  (OP)	2008/01/27 00:11:24	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 2, Offsets (arcsec) (-59.8, -0.5) (OP)	2008/01/27 00:11:30	
	ESQ	End of sequence		
>	SEQ	STOP_and_Full_Sun_Pre_Bakeout_B:  (OP)	2008/01/27 10:00:54	
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center pointing.		
	COM	This SEQ stops previous obs, moves to compromise focus. The difference in this SEQ and STOP_and_Full_Sun_Pr_Bakeout_A is that it takes Al/poly and Al/mesh while A takes Ti/poly and C/poly		
	COM	Takes two full disk uncompressed pre-bakeout images.Al/poly and Al/mesh 		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	79310F245CC3/14B0 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/27 10:01:00	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (-945.0, 0.0) (OP)	2008/01/27 10:11:00	
	ESQ	End of sequence		
>	SEQ	STOP_and_2x2_Full_Sun_Synoptic_A_1:  (OP)	2008/01/27 18:18:24	
	COM	=======================		
	COM	Special 2x2 binned Synoptic with a reduced data rate		
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center poiting.		
	COM	This SEQ stops previous obs, moves to compromise focus, takes 2x2 binned synoptic images and one dark.		
	COM	The difference with default-B is to take Thin-Be instead of C/Poly.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun with AR - 2x2 - Al/mesh(128/2048) + Ti/poly(256/4096) + dark cal(4096) + Al/poly(128/4096) + Thin-Be(1024/23142)		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	D25E555D356D/14A4 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/27 18:18:30	
	ESQ	End of sequence		
>	SEQ	HOP63_6:  (OP)	2008/01/27 18:28:24	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (-945.0, 0.0) (OP)	2008/01/27 18:28:30	
	ESQ	End of sequence		
>	SEQ	STOP_and_2x2_Full_Sun_Synoptic_B_2:  (OP)	2008/01/27 23:59:54	
	COM	=======================		
	COM	Special 2x2 binned Synoptic with a reduced data rate		
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center poiting.		
	COM	This SEQ stops previous obs, moves to compromise focus, takes 2x2 binned synoptic images and one dark.		
	COM	The difference with default-A is to take C/Poly instead of Thin-Be.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun with AR - 2x2 - Al/mesh(128/2048) + Ti/poly(256/4096) + dark cal(4096) + Al/poly(128/4096) + C/Poly(256/4096)		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	E26771BCD03D/14A5 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/28 00:00:00	
	ESQ	End of sequence		
>	SEQ	HOP63_7:  (OP)	2008/01/28 00:09:54	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 1, Offsets (arcsec) (-55.7, -0.5) (OP)	2008/01/28 00:10:00	
	ESQ	End of sequence		
>	SEQ	STOP_and_2x2_Full_Sun_Synoptic_A_2:  (OP)	2008/01/28 10:10:54	
	COM	=======================		
	COM	Special 2x2 binned Synoptic with a reduced data rate		
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center poiting.		
	COM	This SEQ stops previous obs, moves to compromise focus, takes 2x2 binned synoptic images and one dark.		
	COM	The difference with default-B is to take Thin-Be instead of C/Poly.		
	COM			
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun with AR - 2x2 - Al/mesh(128/2048) + Ti/poly(256/4096) + dark cal(4096) + Al/poly(128/4096) + Thin-Be(1024/23142)		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	D25E555D356D/14A4 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/28 10:11:00	
	ESQ	End of sequence		
>	SEQ	HOP63_8:  (OP)	2008/01/28 10:20:54	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_ENA P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (-945.0, 0.0) (OP)	2008/01/28 10:21:00	
	ESQ	End of sequence		
	COM	EIS callibaration starts here		
>	SSQ	EIS_Calibration_and_XRT_Focus_Recal: STOP and CAL (DIS-DIS-DIS) - low data rate - no focus recalib-2 (A2F97EB36363/0070)	2008/01/28 15:59:54	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/28 16:00:00	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 945.0) (OP)	2008/01/29 00:03:00	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (-945.0, 0.0) (OP)	2008/01/29 02:03:00	
	ESQ	End of sequence		
v	SEQ	HOP63_9:  (OP)	2008/01/29 04:03:54	
	I&T	OBSTITLE: HOP63		
	I&T	OBS_DEC: QS Dynamics - 2 filters - Gband-FOV 256x512		
	I&T	TARGET: QR		
	I&T	SCI_OBJ: CH, EFR, JET, QS, XBP		
	I&T	JOIN_SB: ESX		
	I&T	OBS_ID: HOP63		
	XRT	MDP_XRT_CTRL_MANU P		:01:38_00
	XRT	XRT_FOCUS_POSITION -361 P		
	XOB	1ADB10310E62/14AF (Normal) P		
	XOB	5D6A7FFF87B6/1483 (Flare) P		
	XRT	MDP_XRT_ARS_DIS P		
	XRT	MDP_XRT_FLD_DIS P		
	XRT	MDP_XRT_FLRCTRL_ENA P		
	XRT	MDP_XRT_CTRL_AUTO P		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, -945.0) (OP)	2008/01/29 04:03:00	
	ESQ	End of sequence		
>	SEQ	Pre_Bakeout_Gband_Diffuser_Image:  (OP)	2008/01/29 06:08:54	
	COM	=======================		
	COM			
	COM	Insert this SEQ  6 sec before Sun center pointing.		
	COM	Takes one G-band Diffuser Image and one Gband image		
	I&T	OBSTITLE: Synoptic		
	I&T	TARGET: FS		
	I&T	SCI_OBJ: FS, SYN		
	I&T	OBS_DEC: Full Sun		
	I&T	JOIN_SB: X		
	XRT	MDP_XRT_CTRL_MANU N		:01:38_00
	XRT	XRT_FOCUS_POSITION -86 N		
	XOB	2D167BB437EC/14B3 (Normal) P		
	XRT	MDP_XRT_FLD_DIS N		
	XRT	MDP_XRT_FLRCTRL_DIS N		
	XRT	MDP_XRT_ARS_DIS N		
	XRT	MDP_XRT_CTRL_AUTO N		
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/29 06:08:00	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, -945.0) (Real)	2008/01/29 06:18:00	
	ESQ	End of sequence		
>	SEQ	Manual_control_for_bakeout_commads:  (OP)	2008/01/29 06:59:00	
	XRT	MDP_XRT_CTRL_MANU N	2008/01/29 07:00:00	:01:38_00
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PROHIBIT:  (OP)	2008/01/29 10:00:00	
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PERMIT:  (OP)	2008/01/29 10:05:00	
	ESQ	End of sequence		
>	PT	: ORe-point Start: Track 0, Offsets (arcsec) (0.0, 0.0) (OP)	2008/01/29 10:15:00	
	ESQ	End of sequence		
>	EXT	XRT_OPPLN_PROHIBIT_2:  (OP)	2008/01/30 11:57:00	
	ESQ	End of sequence		
>	EXT	XRT_OP_END:  (OP)	2008/01/30 12:02:00	
	ESQ	End of sequence		
>	EXT	XRT_PLN_END:  (OP)	2008/01/30 12:02:00	
	ESQ	End of sequence		
	ESQ	End of sequence