;+ ; hsi_image script - created Thu Dec 15 16:22:23 2022 by hsi_params2script.pro ; Includes only parameters changed from default settings. ; ; Note: This script simply sets control parameters in the hsi_image object as they ; were when you wrote the script. To make the object do anything in this script, ; you need to add some action commands. For instance, the command ; image= obj->getdata() ; would generate and return the image. ; ; For a complete list of control parameters look at the tables in ; http://hesperia.gsfc.nasa.gov/ssw/hessi/doc/hsi_params_all.htm ; ; There are several ways to use this script: ; ; A. Run this procedure via this command (compile first if it's not in your IDL path): ; hsi_image_script_nondefault_params_clean_20150930_0202_32tx2e, obj=obj ; Note: you can set additional parameters or override parameters in script via: ; hsi_image_script_nondefault_params_clean_20150930_0202_32tx2e, obj=obj, $ ; param1=param1, param2=param2,... ; or ; B. Compile and execute it as a main program by: ; 1. Comment out the "pro" line and save. ; 2. From the command line, $ ; type .run hsi_image_script_nondefault_params_clean_20150930_0202_32tx2e. ; In the IDLDE, click Compile, then Execute. ; 3. Use .GO to restart at the beginning of the script ; or ; C. Execute it as a batch file via: ; 1. Comment out the "pro" and "end" lines and save. ; 2. Run the commands via @hsi_image_script_nondefault_params_clean_20150930_0202_32tx2e ; ; Once you have run the script (via one of those 3 methods), you will have an ; hsi_image object called obj that is set up as it was when you wrote the script. ; You can proceed using obj from the command line or the hessi GUI. ; To use it in the GUI, type ; hessi,obj ; To use it from the command line, here are a few examples of commands: ; data = obj->getdata() ; retrieve the last image made ; data = obj->getdata(use_single=0) ; retrieve all images in cube ; obj->plot ; plot the last image ; obj->plotman ; plot the last image in plotman ; obj->plotman, /choose ; choose which image(s) in cube to plot in plotman ;- pro hsi_image_script_nondefault_params_clean_20150930_0202_32tx2e, obj=obj, _extra=_extra obj = hsi_image() obj-> set, cbe_normalize= 1 obj-> set, image_algorithm= 'CLEAN' ;obj-> set, profile_jpeg_plot= 1 ;obj-> set, $ ; profile_plot_dir= '/data/rhessi_extras/flare_images_v2/2015/09/30/20150930_0202_0241/CLEAN/profcomp' ;obj-> set, viscomp_jpeg_plot= 1 ;obj-> set, $ ; viscomp_plot_dir= '/data/rhessi_extras/flare_images_v2/2015/09/30/20150930_0202_0241/CLEAN/viscomp' ;obj-> set, snr_chk= 1 ;obj-> set, $ ; snr_vis_file= '/data/rhessi_extras/visibility_fits_v2/2015/09/30/hsi_vis_20150930_0202_0240_32tx2e.fits' obj-> set, mpat_coord= 'CART' obj-> set, image_dim= [101, 101] obj-> set, pixel_size= [1.50000, 1.50000] obj-> set, im_time_interval= [['30-Sep-2015 02:02:32.200', '30-Sep-2015 02:04:26.543'], $ ['30-Sep-2015 02:04:26.543', '30-Sep-2015 02:06:09.543'], ['30-Sep-2015 02:06:09.543', $ '30-Sep-2015 02:07:46.543'], ['30-Sep-2015 02:07:46.543', '30-Sep-2015 02:09:07.543'], $ ['30-Sep-2015 02:09:07.543', '30-Sep-2015 02:10:20.543'], ['30-Sep-2015 02:10:20.543', $ '30-Sep-2015 02:11:20.543'], ['30-Sep-2015 02:11:20.543', '30-Sep-2015 02:12:20.543'], $ ['30-Sep-2015 02:12:20.543', '30-Sep-2015 02:13:20.543'], ['30-Sep-2015 02:13:20.543', $ '30-Sep-2015 02:14:20.543'], ['30-Sep-2015 02:14:20.543', '30-Sep-2015 02:15:20.543'], $ ['30-Sep-2015 02:15:20.543', '30-Sep-2015 02:16:20.543'], ['30-Sep-2015 02:16:20.543', $ '30-Sep-2015 02:17:20.543'], ['30-Sep-2015 02:17:53.331', '30-Sep-2015 02:18:53.538'], $ ['30-Sep-2015 02:18:53.538', '30-Sep-2015 02:19:53.538'], ['30-Sep-2015 02:19:53.538', $ '30-Sep-2015 02:20:53.538'], ['30-Sep-2015 02:20:53.538', '30-Sep-2015 02:21:53.538'], $ ['30-Sep-2015 02:21:53.538', '30-Sep-2015 02:22:53.538'], ['30-Sep-2015 02:22:53.538', $ '30-Sep-2015 02:23:53.538'], ['30-Sep-2015 02:23:53.538', '30-Sep-2015 02:24:53.538'], $ ['30-Sep-2015 02:24:53.538', '30-Sep-2015 02:25:53.538'], ['30-Sep-2015 02:25:53.538', $ '30-Sep-2015 02:26:53.538'], ['30-Sep-2015 02:26:53.538', '30-Sep-2015 02:27:53.538'], $ ['30-Sep-2015 02:27:53.538', '30-Sep-2015 02:28:53.538'], ['30-Sep-2015 02:28:53.538', $ '30-Sep-2015 02:29:53.538'], ['30-Sep-2015 02:29:53.538', '30-Sep-2015 02:30:53.538'], $ ['30-Sep-2015 02:30:53.538', '30-Sep-2015 02:31:56.538'], ['30-Sep-2015 02:31:56.538', $ '30-Sep-2015 02:33:04.538'], ['30-Sep-2015 02:33:04.538', '30-Sep-2015 02:34:21.538'], $ ['30-Sep-2015 02:34:21.538', '30-Sep-2015 02:35:52.538'], ['30-Sep-2015 02:36:49.188', $ '30-Sep-2015 02:37:55.800'], ['30-Sep-2015 02:37:55.800', '30-Sep-2015 02:39:20.800'], $ ['30-Sep-2015 02:39:20.800', '30-Sep-2015 02:40:56.800']] obj-> set, use_flux_var= 0L obj-> set, use_phz_stacker= 1L obj-> set, xyoffset= [680.909, -393.349] obj-> set, im_energy_binning= [[6.00000, 12.0000], [12.0000, 25.0000]] obj-> set, time_bin_def= [1.00000, 2.00000, 4.00000, 4.00000, 8.00000, 16.0000, 32.0000, $ 64.0000, 64.0000] obj-> set, time_bin_min= 512L obj-> set, det_index_mask= [0B, 0B, 1B, 0B, 1B, 1B, 1B, 1B, 0B] obj-> set, clean_frac= 0.100000 obj-> set, clean_show_maps= 0 obj-> set, clean_show_chi= 0 obj-> set, clean_progress_bar= 0 obj-> set, clean_beam_width_factor= 2.00000 obj-> set, clean_regress_combine= 'full_resid' zzz = {HSI_VIS_SRC_STRUCTURE, $ SRCTYPE: 'circle', $ SRCFLUX: 1.00000, $ SRCX: 0.00000, $ SRCY: 0.00000, $ SRCFWHM: 10.0000, $ ECCEN: 0.00000, $ SRCPA: 0.00000, $ LOOP_ANGLE: 0.00000, $ ALBEDO_RATIO: 0.100000, $ SRCHEIGHT: 10.0000, $ ALBEDO_APPLY: 1, $ FITMASK: [1, 1, 1, 1, 1, 1, 1, 1, 1, 1] } obj-> set, vf_srcin= zzz obj-> set, vis_cs_abort_numerical_issues= 1 obj-> set, vis_cs_sparseness= 0.700000 if keyword_set(_extra) then obj->set, _extra=_extra end