LASCO/EIT Operations Status
Daily Reports -- May 1996

31-May-1996 (C1-C2-C3-EIT synoptic)

30-May-1996 (C1-C2-C3-EIT synoptic)

29-May-1996 (C1-C2-C3-EIT synoptic; re-center M1 at 19:05 UT, EIT XBP)

	19:05 m1_center.sce (with new values)

28-May-1996 (C1-C2-C3-EIT synoptic; LEB power cycled 2x)

	OBE hung waiting for ICE response ~15:45; during re-boot
	the POCC lost commandability during fp startup, so entire
	process was repeated
	Confirmed EIT Sector Wheel Hang (note TM temperatures)
	LEB power cycled at 16:08, 17:12 UT

27-May-1996 (C1-C2-C3-EIT synoptic)

	l_set_lobt executed ~19:09 UT to fix ~4 min. drift

26-May-1996 (C1-C2-C3-EIT synoptic)

	EIT CCD heater inadvertently turned on/off during xray bp study
	by incorrect camera table

25-May-1996 (C1-C2-C3 synoptic; EIT CCD bakeout ends at 16:38 UT)

24-May-1996 (C1-C2-C3 synoptic; EIT CCD bakeout)

	20:21 EIT zones SP=110 Alg ON. Deriv FALSE
	P=5, I=2, D=0

23-May-1996 (Open LASCO doors; EIT cals & CCD bakeout; COB/M1 centering)
	
	All LASCO doors opened ~15:47-16:07 UT
	EIT Continuous RO images
	EIT CCD bakeout begins ~19:21 UT
	COB leg movements begin ~21:26 UT

22-May-1996 (REBOOT LEB; close LASCO doors)

	(Debug Points 1,3,4 through multiple flushes)
	Cycle power to LEB ~15:56 UT
	Closed all LASCO doors ~17:05-17:14 UT prior to Orbit trim and
		Momentum Management

21-May-1996 (90 degree roll for JOP002; C1 NaI cal)

	C1 calibration sequence new_naI_cal_1 during 90 degree roll 
		at ~02:30 and ~11:30 UT, and at ~20:00 (0 degrees)
	C2 and C3 color and Orange pw sequences (all 2x2 binned) taken
		before, during, and after the roll
	EIT participation in JOP 002 (North coronal hole study)
	
20-May-1996 (C1-C2-C3-EIT synoptic; prepare for 90 degree roll)

	02:12 UT C3 image with "swarm of space debris"
	EIT testing before 90 degree roll
	C1 calibration sequence new_naI_cal_1 began at ~20:00 UT

19-May-1996 (C1-C2-C3-EIT synoptic)

18-May-1996 (EIT AR study; LASCO doors opened; C1-C2-C3-EIT synoptic)

	EIT AR 7962 SW limb study
	LASCO doors re-opened 15:27-15:35 UT	

17-May-1996 (C1-C2-C3-EIT synoptic; LASCO doors closed)

	20:00-20:20 UT  all LASCO doors closed for momentum mngmnt. burns
	EIT study of AR 7962 at SW limb

16-May-1996 (C1-C2-C3-EIT synoptic)

15-May-1996 (C1-C2-C3-EIT synoptic)

14-May-1996 (C1-C2-C3-EIT synoptic; EIT JOP 22; testing for synoptic)


	EIT JOP022 at 20:03, 20:29, 23:44 UT

13-May-1996 (C1-C2-C3-EIT synoptic; C1 testing for synoptic)

12-May-1996 (C1-C2-C3-EIT synoptic)

11-May-1996 (C1-C2-C3-EIT synoptic; C1 testing for synoptic)

10-May-1996 (C1-C2-C3-EIT synoptic; EIT testing for synoptic)

	Testing of C1 with check & correct 19:01-19:43 UT

09-May-1996 (C1-C2-C3-EIT synoptic; EIT testing for synoptic)

08-May-1996 (C1-C2-C3-EIT synoptic; EIT testing for synoptic)

07-May-1996 (C1-C2-C3-EIT synoptic)

06-May-1996 (C3 Comet Hyakutake obs end; EIT 2x2 test; HR tlm; LEB REBOOT)

	Test of multiple EIT 2x2 CCD summing failed
	30 minutes of HR (submode 2) tlm with EIT 195 images at 20:30 UT
	LEB REBOOTed at 22:30 UT to clear 04 May SeqPW anomaly

05-May-1996 (C3 Comet Hyakutake obs; some C1-C2-EIT)

04-May-1996 (C3 Comet Hyakutake obs; some C1-C2-EIT)

	Investigated SeqPW anomaly
	Commanded movements of C3 Polarizer Wheel 17:54-18:15 UT

03-May-1996 (C3 Comet Hyakutake obs; some C1-C2-EIT)

02-May-1996 (C3 Comet Hyakutake obs; some C1-C2-EIT)

01-May-1996 (C3 Comet Hyakutake obs; some C1-C2-EIT)