/* 2006 Oct 29 edited by H. Hara */

/* DCBC 461番は、DCBC_PI.orlで管理     */
/* DEFSEQ(DCBC): EIS_EMR_TURN-ON_SEQ{  */
/*  NUMBER: 460 ;                      */
/* }                                   */

DEFSEQ(DCBC): EIS_ON_DCBC{
 NUMBER: 461; 
 NP_C.: "" ; 
 NP_C.: "****************************" ;
    C.: "EIS Start-up 1-a " ;
 NP_C.: "****************************" ;
    C.: "EIS ON" ; 
   CMD: TCIB_EIS_ON ;
 NP_C.: "   Wait for 10 sec / Confirm HK1_EIS_ON/OFF = ON " ; 
 NP_C.: "" ;
   CMD: EIS_COPY_ICU_SW4 ;
 NP_C.: "   Confirm EIS_CMD_BC1/_BC2 = 0x 2B 04 " ; 
 NP_C.: "" ;
 NP_C.: "****************************" ;
    C.: "EIS Start-up 1-b " ;
 NP_C.: "****************************" ;
 NP_C.: "" ;
   CMD: EIS_MODE_STBY ;
 NP_C.: "   Wait for 30 sec / Confirm EIS_MODE = STBY " ;
   CMD: MDP_STS_EIS_ERR_CLR ; 
 NP_C.: "   Confirm MDP_STS_EIS_ERR = OK " ;
   CMD: EIS_ICU_MON_DIS ; 
 NP_C.: "   Confirm EIS_ICU_MON_FLG = DIS " ;
 NP_C.: "" ; 
    C.: "RAM-sub計画 880 (EIS_HKTBL) を照合用テーブルへ転送する。" ;
 NP_C.: " 　ファイル一行目のコメントは、「 FM Functional Test2 」" ;
 NP_C.: "Transfer RAM-sub 880 (EIS_HKTBL) to EGSE memory area for comparison" ;
 NP_C.: "" ; 
    C.: "RAM-sub計画 881 (EIS_HKTBL) を880と比較してコマンド" ;
 NP_C.: "を生成し、アップロードを実施する。" ;
 NP_C.: "　　ファイル一行目のコメントは、「 USC Testing 」" ;
 NP_C.: "Upload RAM-sub ID= 881 (EIS_HKTBL)" ;
 NP_C.: "" ; 
    C.: "STS_CHKをOFFにしてから次のダンプコマンドを送出する。" ;
   CMD: EIS_DUMP_HKTBL 00 00 00 02 80 ; 
    C.: "ダンプ照合のOKを確認する。" ;
 NP_C.: "Error must not happen. " ;
    C.: "STS_CHKをONにする。" ;
 NP_C.: "" ; 
   CMD: EIS_ICU_MON_ENA ; 
 NP_C.: "   Confirm EIS_ICU_MON_FLG = ENA " ;
 NP_C.: "" ; 
   CMD: EIS_SET_MHC_OPEPAR 02 58 00 01 E0 70 00 00 80 FC 41 33 14 6D 00 96 02 BC 06 F4 01 27 ;
 NP_C.: "   Confirm paprameters 0x 00 96 with EIS Java-QL " ;
 NP_C.: "" ; 
 NP_C.: "****************************" ;
    C.: "EIS Start-up 1-c " ;
 NP_C.: "****************************" ;
 NP_C.: "" ; 
    C.: "   Confirm EIS_MODE = STBY " ; 
 NP_C.: "" ; 
   CMD: EIS_MODE_CHG_ENA ;
 NP_C.: "   Confirm EIS_MODE_CHG_FLG = ENA " ;
   CMD: EIS_MODE_MANU ;
 NP_C.: "   Confirm EIS_MODE = MANU " ;
   CMD: EIS_CAM_IDLE ;
 NP_C.: "   Confirm EIS_CAM_VLD_FLG = VLD " ;
 NP_C.: "" ; 
 NP_C.: "   Confirm EIS_MHC_MEM_MODE = ROM " ;
 NP_C.: "   Confirm EIS_SHUTTER_STS = OPN " ;
 NP_C.: "   Confirm EIS_MHC_CMIR_RESOLV_POS = about 892 arcsec [         ] " ;
 NP_C.: "   Confirm EIS_MHC_SLIT_RESOLV_POS = about   0 degree [         ] " ;
 NP_C.: "" ; 
   CMD: EIS_LOAD_MHC_SOFT7 ; 
    C.: "ソフトウェアのロードに約3分を要する。" ;
 NP_C.: "   Wait for 3 min " ;
 NP_C.: "   Confirm EIS_MHC_LOAD_STS = LOAD during loading the MHC software " ;
 NP_C.: "" ; 
   CMD: EIS_MHC_MODE_RAM ; 
 NP_C.: "   Wait for 15 sec " ;
   CMD: EIS_MHC_ABORT ; 
 NP_C.: "   Confirm EIS_MHC_MEM_MODE = RAM " ;
 NP_C.: "   Confirm EIS_SHUTTER_STS = OPN " ;
 NP_C.: "   Confirm EIS_MHC_CMIR_RESOLV_POS = about 892 arcsec [         ] " ;
 NP_C.: "   Confirm EIS_MHC_SLIT_RESOLV_POS = about   0 degree [         ] " ;
 NP_C.: "" ; 
   CMD: EIS_CLR_ICU_ERR ;
 NP_C.: "   Confirm EIS_MHC_IF_ERR = 0x0000 " ;
 NP_C.: "   Wait for 5 sec  (then turn off Clamshell encoders) " ;
   CMD: EIS_UPLOAD_MHCPAR 69 C3 FF FF;
 NP_C.: "   Wait for 10 sec " ;
   CMD: EIS_DUMP_MHCPAR 02 00 00 00 CC ;
 NP_C.: "RAMサブ計画未登録領域のため、衛星管制卓での照合は実施されない。" ;
 NP_C.: "" ; 
   CMD: EIS_MHC_WATDOG_ENA ;
 NP_C.: "   Confirm EIS_MHC_WATDOG_FLG = ENA " ;
   CMD: EIS_MHC_SAFE_ENA ;
 NP_C.: "   Confirm EIS_MHC_SAFE_FLG = ENA " ;
 NP_C.: "" ; 
}

DEFSEQ(DCBC) : EIS_ON_INIT_DCBC{
 NUMBER: 462 ;
 NP_C.: "" ; 
 NP_C.: "****************************" ;
    C.: "EIS Start-up 2-a (COMENG000)" ;
 NP_C.: "****************************" ;
 NP_C.: "EIS ON" ; 
   CMD: TCIB_EIS_ON ;
 NP_C.: "   Wait for 10 sec / Confirm HK1_EIS_ON/OFF = ON " ; 
 NP_C.: "" ;
   CMD: EIS_COPY_ICU_SW4 ;
 NP_C.: "   Confirm EIS_CMD_BC1/_BC2 = 0x 2B 04 " ; 
 NP_C.: "" ;
 NP_C.: "****************************" ;
    C.: "EIS Start-up 2-b (COMENG001)" ;
 NP_C.: "****************************" ;
 NP_C.: "" ;
   CMD: EIS_MODE_STBY ;
 NP_C.: "   Wait for 30 sec / Confirm EIS_MODE = STBY " ;
   CMD: MDP_STS_EIS_ERR_CLR ; 
 NP_C.: "   Confirm MDP_STS_EIS_ERR = OK " ;
   CMD: EIS_ICU_MON_DIS ; 
 NP_C.: "   Confirm EIS_ICU_MON_FLG = DIS " ;
 NP_C.: "" ; 
    C.: "RAM-sub計画 880 (EIS_HKTBL) を照合用テーブルへ転送する。" ;
 NP_C.: " 　ファイル一行目のコメントは、「 FM Functional Test2 」" ;
 NP_C.: "Transfer RAM-sub 880 (EIS_HKTBL) to EGSE memory area for comparison" ;
 NP_C.: "" ; 
    C.: "RAM-sub計画 881 (EIS_HKTBL) を880と比較してコマンド" ;
 NP_C.: "を生成し、アップロードを実施する。" ;
 NP_C.: "　　ファイル一行目のコメントは、「 USC Testing 」" ;
 NP_C.: "Upload RAM-sub ID= 881 (EIS_HKTBL)" ;
 NP_C.: "" ; 
 NP_C.: "STS_CHKをOFFにしてから次のダンプコマンドを送出する。" ;
   CMD: EIS_DUMP_HKTBL 00 00 00 02 80 ; 
    C.: "ダンプ照合のOKを確認する。" ;
 NP_C.: "Error must not happen. " ;
    C.: "STS_CHKをONにする。" ;
 NP_C.: "" ; 
   CMD: EIS_ICU_MON_ENA ; 
 NP_C.: "   Confirm EIS_ICU_MON_FLG = ENA " ;
 NP_C.: "" ; 
   CMD: EIS_SET_MHC_OPEPAR 02 58 00 01 E0 70 00 00 80 FC 41 33 14 6D 00 96 02 BC 06 F4 01 27 ;
 NP_C.: "   Confirm paprameters 0x 00 96 with EIS Java-QL " ;
 NP_C.: "" ; 
 NP_C.: "****************************" ;
    C.: "EIS Start-up 2-c  (COMENG02)" ;
 NP_C.: "****************************" ;
 NP_C.: "" ; 
    C.: "Confirm EIS_MODE = STBY " ; 
 NP_C.: "" ; 
   CMD: EIS_MHC_MK_HTR_OFF ; 
 NP_C.: "   Confirm EIS_MHC_MK_HTR_PWR = OFF " ;
   CMD: EIS_MHC_E28V_ON ; 
 NP_C.: "   Confirm EIS_MHC_E28V_PWR = ON " ;
   CMD: EIS_MHC_M28V_ON ; 
 NP_C.: "   Confirm EIS_MHC_M28V_PWR = ON " ;
   CMD: EIS_MHC_OPE_HTR_ON ; 
 NP_C.: "   Confirm EIS_OPE_HTR_PWR = ON " ;
 NP_C.: "" ; 
 NP_C.: "   Confirm EIS_MHC_MEM_MODE = ROM " ;
 NP_C.: "   Confirm EIS_SHUTTER_STS = OPN " ;
 NP_C.: "   Confirm EIS_MHC_CMIR_RESOLV_POS = about 892 arcsec [         ] " ;
 NP_C.: "   Confirm EIS_MHC_SLIT_RESOLV_POS = about   0 degree [         ] " ;
 NP_C.: "" ; 
   CMD: EIS_LOAD_MHC_SOFT7 ; 
    C.: "ソフトウェアのロードに約3分を要する。" ;
 NP_C.: "   Wait for 3 min " ;
 NP_C.: "   Confirm EIS_MHC_LOAD_STS = LOAD during loading the MHC software " ;
 NP_C.: "" ; 
   CMD: EIS_MHC_MODE_RAM ; 
 NP_C.: "   Wait for 15 sec " ;
   CMD: EIS_MHC_ABORT ; 
 NP_C.: "   Confirm EIS_MHC_MEM_MODE = RAM " ;
 NP_C.: "   Confirm EIS_SHUTTER_STS = OPN " ;
 NP_C.: "   Confirm EIS_MHC_CMIR_RESOLV_POS = about 892 arcsec [         ] " ;
 NP_C.: "   Confirm EIS_MHC_SLIT_RESOLV_POS = about   0 degree [         ] " ;
 NP_C.: "" ; 
   CMD: EIS_CLR_ICU_ERR ;
 NP_C.: "   Confirm EIS_MHC_IF_ERR = 0x0000 " ;
 NP_C.: "   Wait for 5 sec  (then turn off Clamshell encoders) " ;
   CMD: EIS_UPLOAD_MHCPAR 69 C3 FF FF;
 NP_C.: "   Wait for 10 sec " ;
   CMD: EIS_DUMP_MHCPAR 02 00 00 00 CC ;
    C.: "RAMサブ計画未登録領域のため、衛星管制卓での照合は実施されない。" ;
 NP_C.: "" ; 
   CMD: EIS_MHC_WATDOG_ENA ;
 NP_C.: "   Confirm EIS_MHC_WATDOG_FLG = ENA " ;
   CMD: EIS_MHC_SAFE_ENA ;
 NP_C.: "   Confirm EIS_MHC_SAFE_FLG = ENA " ;
 NP_C.: "" ; 
}

DEFSEQ(DCBC) : EIS_OFF_DCBC{
 NUMBER: 463 ;
 NP_C.: "" ; 
   CMD: EIS_MODE_MANU ;
 NP_C.: "   Confirm EIS_MODE = MANU " ;
   CMD: EIS_CLR_ICU_ERR ;
 NP_C.: "" ; 
   CMD: EIS_MODE_STBY ;
 NP_C.: "   Confirm EIS_MODE = STBY " ;
 NP_C.: "" ; 
   CMD: TCIB_EIS_OFF ;
 NP_C.: "   Confirm HK1_EIS_ON/OFF = OFF " ;
}

DEFSEQ(DCBC) : EIS_MODE_CHG_DIS_DCBC{
 NUMBER: 464 ;
 NP_C.: "" ; 
   CMD: EIS_MODE_CHG_DIS ;
 NP_C.: "   Confirm EIS_MODE_CHG_FLG = DIS " ; 
}

DEFSEQ(DCBC) : EIS_SET_OPE_HTR_DUTY_DCBC{
 NUMBER: 465 ;
     C.: "EIS Operational Heater Setup (COMENG003) " ; 
 NP_CMD: EIS_UPLOAD_MHCPAR 21 2E 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 AF 36 DB ;
 NP_CMD: EIS_UPLOAD_MHCPAR A9 30 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 41 B1 36 DB ;
 NP_CMD: EIS_UPLOAD_MHCPAR 81 B2 12 49 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 69 33 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR E1 B4 12 49 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 09 35 1B 6D ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 36 09 24 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 21 B7 09 24 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 21 B8 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 39 00 00 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 09 3A 03 E8 ;
     C.: "書き換えたMHCPAR内容を次のコマンドでダンプする。"; 
    CMD: EIS_DUMP_MHCPAR 02 00 00 00 CC ; 
     C.: "RAMサブ計画未登録領域のため、衛星管制卓での照合は実施されない。" ;
  NP_C.: "" ;
    CMD: EIS_OPE_HTR_ALL_ON ;
     C.: "   Confirm EIS_OPE_HTR##_PWR = sometimes ON " ;
}

DEFSEQ(DCBC) : EIS_CHG_OPE_HTR_DUTY_DCBC{
 NUMBER: 466 ;
     C.: "EIS Operational Heater Setup (COMENG003) " ; 
    CMD: EIS_OPE_HTR_ALL_OFF ;
  NP_C.: "" ;
     C.: "次のコマンドでオペヒータのデューティ変更を実施。" ;
 NP_CMD: EIS_UPLOAD_MHCPAR 21 2E 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 AF 36 DB ;
 NP_CMD: EIS_UPLOAD_MHCPAR A9 30 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 41 B1 36 DB ;
 NP_CMD: EIS_UPLOAD_MHCPAR 81 B2 12 49 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 69 33 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR E1 B4 12 49 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 09 35 1B 6D ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 36 09 24 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 21 B7 09 24 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 21 B8 24 92 ;
 NP_CMD: EIS_UPLOAD_MHCPAR C9 39 00 00 ;
 NP_CMD: EIS_UPLOAD_MHCPAR 09 3A 03 E8 ;
     C.: "書き換えたMHCPAR内容を次のコマンドでダンプする。"; 
    CMD: EIS_DUMP_MHCPAR 02 00 00 00 CC ; 
     C.: "RAMサブ計画未登録領域のため、衛星管制卓での照合は実施されない。" ;
  NP_C.: "" ;
    CMD: EIS_OPE_HTR_ALL_ON ;
     C.: "   Confirm EIS_OPE_HTR##_PWR = sometimes ON " ;
}