/* FILE:      SOT_200611280100.orl */
/* TITLE:     CTM error clear, Tue, November 28, 2006 */
/* PURPOSE:   SP and FG observations */
/* HISTORY:   CO's - S.Nagata and K.Ichimoto */
/* COMMENTS:  CTM error clear */
/* Execution Definitions */

/* Real sequence execution */

#include "FIXED_OG_SOT.orl"

START: 2006/11/28.08:33:00  {SEQ:SOT_USC34_PASS0100_SEQ;}
START: 2006/11/28.10:10:00  {SEQ:SOT_USC34_PASS0200_SEQ;}
/* end of Real sequence execution */

DEFSEQ(REAL): SOT_USC34_PASS0100_SEQ{
    C.: "< CTM Servo OFF >";
   CMD: FPP_CTM_SERVO_OFF;
    C.: "------------------------------------";
 NP_C.: " CTM_AUTO_MODE       = AUTO    [ ]";
 NP_C.: " CTM_SVO_ON_MODE     = NON     [ ]";
 NP_C.: " CTM_SVO_STBY_MODE   = STBY    [ ]";
 NP_C.: "------------------------------------";
 NP_C.: "";
    C.: "< CTM Manual Mode >";
   CMD: CTM_MANU;
    C.: "------------------------------------";
 NP_C.: " CTM_MANU_MODE       = MANU    [ ]";
 NP_C.: " CTM_AUTO_MODE       = NON     [ ]";
 NP_C.: " CTM_SVO_STBY_MODE   = STBY    [ ]";
 NP_C.: "------------------------------------";
 NP_C.: "";
    C.: "< CTM SRAM Dump >";
   CMD: CTM_DUMP_MEM_RAM 00 03 00 38 00 04;
    C.: "  ( wait 4bytes = ~0sec ) ";
 NP_C.: "------------------------------------";
 NP_C.: " COM QL check with HEX mode: 7F FF FF FF [ ]";
 NP_C.: "------------------------------------";
 NP_C.: "";
    C.: "< CTM SRAM UPLOAD >";
   CMD: CTM_UPLOAD_RAM 03 00 38 04 00 00 00 00;
 NP_C.: "";
    C.: "< CTM SRAM Dump >";
   CMD: CTM_DUMP_MEM_RAM 00 03 00 38 00 04;
    C.: "  ( wait 4bytes = ~0sec ) ";
 NP_C.: "------------------------------------";
 NP_C.: " COM QL check with HEX mode: 00 XX XX XX (not 7F FF FF FF) [ ]";
 NP_C.: " CTM_ERR_LOG_CNT     stop cnt up       [ ]";
 NP_C.: " CTM_ERR_S/W_CNT     stop cnt up       [ ]";
 NP_C.: "------------------------------------";
  NP_C.: "";
    C.: "< CTM Error Clear >";
   CMD: CTM_ERR_CLR;
    C.: "------------------------------------";
 NP_C.: " CTM_ERR_OVRFLW      = OK      [ ]";
 NP_C.: "------------------------------------";
 NP_C.: "";
    C.: "< CTM Error Log Clear >";
   CMD: CTM_ERR_LOG_CLR;
    C.: "------------------------------------";
 NP_C.: " CTM_ERR_CODE        = 0       [ ]";
 NP_C.: " CTM_ERR_CODE2       = 0       [ ]";
 NP_C.: " CTM_ERR_LOG_CNT     = 0       [ ]";
 NP_C.: " CTM_ERR_S/W_CNT     = 0       [ ]";
 NP_C.: "------------------------------------";
 NP_C.: "";
    C.: "< CTM Auto Mode >";
   CMD: CTM_AUTO;
    C.: "------------------------------------";
 NP_C.: " CTM_MANU_MODE       = NON     [ ]";
 NP_C.: " CTM_AUTO_MODE       = AUTO    [ ]";
 NP_C.: " CTM_SVO_STBY_MODE   = STBY    [ ]";
 NP_C.: "------------------------------------";
    C.: "< CT Wedge East >";
   CMD: FPP_MTR_POS 04 00 AB;
NP_CMD: FPP_MTR_MOVE 04 00;
    C.: "------------------------------------";
 NP_C.: " FPP_WW_POS          = 171     [ ]";
 NP_C.: "------------------------------------";
    C.: "< CTM GO >";
   CMD: FPP_CTM_GO;
    C.: "------------------------------------";
 NP_C.: " FPP_ME_STATE        = 0x0A    [ ]";
 NP_C.: " CTM_SVO_ON_MODE     = ON      [ ]";
 NP_C.: "------------------------------------";
    C.:"< CT DIAG ON >";
   CMD: FPP_CT_DIAG_MODE 01 00;
    C.: "------------------------------------";
 NP_C.: " FPP_CT_DIAG         = ON      [ ]";
 NP_C.: "------------------------------------";
}

DEFSEQ(REAL): SOT_USC34_PASS0200_SEQ{
    C.: "< CT DIAG OFF >";
   CMD: FPP_CT_DIAG_MODE 00 00;
    C.: "------------------------------------";
 NP_C.: " FPP_CT_DIAG         = OFF     [ ]";
 NP_C.: "------------------------------------";
    C.: "< DIAG OFFにならなかった場合、以下を実行 >";
   CMD: MDP_FG_CTRL_MANU;
    C.: "------------------------------------";
 NP_C.: " MDP_FG_CTRL_MODE    = MANU    [ ]";
 NP_C.: " FPP_FG_STATE        = 00      [ ]";
 NP_C.: "------------------------------------";
   CMD: FPP_CT_DIAG_MODE 00 00;
    C.: "------------------------------------";
 NP_C.: " FPP_CT_DIAG         = OFF     [ ]";
 NP_C.: "------------------------------------";
   CMD: MDP_FG_CTRL_AUTO;
    C.: "------------------------------------";
 NP_C.: " MDP_FG_CTRL_MODE    = AUTO    [ ]";
 NP_C.: "------------------------------------";
}