There are a variety of routines which will produce listings of the images and pointing locations of the SXT partial frame images.
The routine PR_SXTOBS will read the observing log and list every FFI and PFI image
taken for the times requested. The format of the output is simply the output
of GET_INFO which is described in detail in the Reference Guide
(PR_SXTOBS simply reads the observing log and then calls GET_INFO). The command:
IDL> pr_sxtobs,'15-nov-91 22:00','15-nov-91 22:05',/long
will produce the output:
PR_SXTOBS.PRO Run: 20-Dec-1993 21:06:29.00 SXT Observing Log Search from: 15-NOV-91 22:00:00 to 15-NOV-91 22:05:00 0 15-NOV-91 22:03:40 QT/H Open /Mg3 Half Norm C 17 338.0 64x 64 100% S15W11 0% 41.3 1 15-NOV-91 22:03:48 QT/H Open /Al.1 Half Norm C 17 338.0 64x 64 100% S15W11 0% 41.2 2 15-NOV-91 22:03:56 QT/H Open /AlMg Half Norm C 19 668.0 64x 64 100% S15W11 0% 41.0 3 15-NOV-91 22:04:04 QT/H Open /Be119 Half Norm C 27 10678.0 64x 64 100% S15W11 0% 40.9 4 15-NOV-91 22:04:18 QT/H Open /Al12 Half Norm C 27 10678.0 64x 64 100% S15W11 0% 40.7 5 15-NOV-91 22:04:32 QT/H Open /Mg3 Half Norm C 19 668.0 64x 64 100% S15W11 0% 40.4 6 15-NOV-91 22:04:36 QT/H Open /Al.1 Half Norm C 23 2668.0 512x512 100% Full D 2% 40.4 7 15-NOV-91 22:04:44 QT/H Open /Al.1 Half Norm C 17 338.0 64x 64 100% S15W11 0% 40.2 8 15-NOV-91 22:04:52 QT/H Open /AlMg Half Norm C 19 668.0 64x 64 100% S15W11 0% 40.1The routine SXTPNT_SUM will read the observing log and give a summary of the unique PFI pointing for a given period. It groups the summary listing based on each unique pointing location over time. The command:
OBS_SUMMARY Ver 3.0
Program Run: 20-Dec-1993 21:12:40.00
Date Times #Img Mode Table# Filter A/B Res Exp C DPE msec ImgSize Loc PntChange NOAA
----------------------------------------------------------------------------------------------------------------------------------
5-OCT-93 13:04:24 - 14:58:24 BCS: 441 SXTP: 146 SXTF: 19 W_H: 677 HXT-L: 1 SXS2: 16 S11E18
5-OCT-93 13:04:24 - 14:56:50 39 QT/Hi 733/1 = Open /Al.1 Full Norm C 16 238.0 128x128 S11E18 ( 0.2) [ 7592]
5-OCT-93 13:04:42 - 14:57:52 37 QT/Hi 733/1 = Open /Al12 Full Norm C 24 3778.0 128x128 S11E18 ( 0.2) [ 7592]
5-OCT-93 13:05:14 - 14:58:24 36 QT/Hi 733/1 = Open /Al.1 Full Norm C 16 238.0 128x128 S11E18 ( 0.2) [ 7592]
5-OCT-93 13:05:54 - 14:56:18 34 QT/Hi 733/1 = Open /Al12 Full Norm C 24 3778.0 128x128 S11E19 ( 0.2) [ 7592]
----------------------------------------------------------------------------------------------------------------------------------
5-OCT-93 15:16:24 - 15:16:24 BCS: 0 SXTP: 1 SXTF: 0 W_H: 0 HXT-L: 0 SXS2: 0 S13E27
5-OCT-93 15:16:24 - 15:16:24 1 QT/Hi 733/1 = Open /Al12 Full Norm C 24 3778.0 128x128 S13E27 ( 0.0) [ 7592]
----------------------------------------------------------------------------------------------------------------------------------
5-OCT-93 15:16:40 - 16:40:56 BCS: 190 SXTP: 133 SXTF: 15 W_H: 606 HXT-L: 1 SXS2: 16 S11E15 *
5-OCT-93 15:16:40 - 16:40:56 33 QT/Hi 733/1 = Open /Al12 Full Norm C 24 3778.0 128x128 S13E17 ( 0.7) [ 7592]
5-OCT-93 15:16:56 - 16:39:20 35 QT/Hi 733/1 = Open /Al.1 Full Norm C 16 238.0 128x128 S13E17 ( 0.7) [ 7592]
5-OCT-93 15:17:28 - 16:39:52 34 QT/Hi 733/1 = Open /Al12 Full Norm C 26 7548.0 128x128 S13E17 ( 0.7) [ 7592]
5-OCT-93 15:18:00 - 16:40:24 31 QT/Hi 733/1 = Open /Al.1 Full Norm C 16 238.0 128x128 S11E15 ( 0.7)
It can be seen that the listing contains information on the number of images of a given filter
for each time span, the heliocentric coordinates, the NOAA active region number(s) if
applicable, the peak flux in HXT-LOW
and SXS2, the GOES flare event level, and a few other things. A ``*'' at the
end of the summary line says that the time of the peak of the GOES event
is contained within the time span shown.